You know it’s essential to keep your Tesla clean and in pristine condition. But did you know there are certain best practices to follow when washing your Model 3?
This blog post will discuss 8 best practices for cleaning your Tesla Model 3. So, you can keep your car looking new for years.
1) Do A Pre-Wash
One of the most essential steps is doing a pre-wash. This involves spraying the car with a hose or pressure washer and gently scrubbing the surface with a car wash mitt. The pre-wash will help remove any dirt and grime accumulated on your vehicle.
It’s essential to make sure that you don’t need to apply too much pressure as this could damage the paintwork. After the pre-wash is complete, rinse the car with plenty of water, and you’re ready for the next step.
2) Use Mild Soap
When washing your Tesla Model 3, you want to ensure you are using the right products and techniques. A crucial step in cleaning your Tesla is to use mild soap. Not only will mild soap be gentle on the paint and other materials, but it will also be safe for the environment.
When looking for a soap to use, opt for a product made specifically for cars. This will ensure that your Model 3’s paint job stays clean and looks its best.
When applying the soft cloth or sponge, lather it with plenty of suds. Ripping off the soap after each wash, use a chamois or microfiber towel to dry your vehicle.
3) Car wash Mode
In Car Wash Mode, the windows are closed, the charge port is locked, and the windshield wipers are disabled. To enable, tap Controls > Service > Car Wash Mode. You must not be charging your vehicle while it’s stationary.
Assuming you are using an automatic car wash, Enable Free Roll keeps your vehicle Neutral and activates free roll throughout the wash while preventing Model Y from applying the parking brake if you leave the seat. Press the brake pedal and select Enable Free Roll. All in all, keep your balance neutral.
The Car Wash Mode will be disabled automatically if the vehicle’s speed exceeds 15 km/h or if the Exit button is touched on the touchscreen.
4) Rinse Thoroughly
When washing your Tesla Model 3, an Important thing to remember is to rinse thoroughly. This will help ensure that no dirt, grime, or debris remains on the surface of your car and that you’ve removed all of the soap and cleaning products from the paint.
To do this, you’ll want to use a hose with a sprayer attachment and a long enough reach to cover the entire body of your car.
Make sure you spray steadily and cover every inch of the vehicle with water. Once finished, dry the surface off with a clean microfiber cloth. Again, rinsing will help protect your Tesla Model 3 from any potential damage caused by dirt and debris.
5) Dry Immediately
This is especially important for cars with paint protection film, as the film is much more vulnerable to water spots and other damage if left wet.
To properly dry the vehicle, you should start using a clean, dry microfiber towel and wipe down the entire car, paying particular attention to any areas that have been washed. If there are still water droplets on the paint, you can use a blower or air compressor to help dry these spots completely.
Once the car has been wiped down, it is essential to use a separate clean, dry towel to buff out any water spots or streaks that may be present.
This will help ensure that your car is sparkling clean and free from any residue from the wash.
6) Wax Regularly
Applying a quality car wax or sealant will help to protect the paint and keep it looking glossy and new for years to come. Not only that, but it can also help to minimize the amount of dirt and dust that accumulates on the car over time, making it much easier to wash your Tesla in the future.
When waxing your Model 3, use a clean microfiber cloth and an applicator pad. Start by washing the car and drying it completely, then apply the wax according to the directions on the package.
Allow the resin to cure for at least 30 minutes before buffing it off with a clean, dry microfabricated cloth. Be sure to avoid getting any wax on your vehicle’s glass or plastic components, as this can cause staining or discoloration.
7) Use A Car Cover
A car cover is a large cloth that you can place over the exterior of your car to protect it from dirt, debris, and other environmental elements that could cause damage to the paint and surface.
Car covers are handy for those who keep their cars parked outside, as they will help protect the vehicle from UV rays, dust, rain, snow, and hail.
Once you have your cover, secure it around the bottom of the car using bungee cords or other tie-downs so it stays firmly in place. It is also a good idea to periodically check your cover for signs of wear and tear so that it can be replaced when necessary.
8) Cleaning the Camera
Clear the camera lens of dirt or debris using a spray bottle or pressure washer to ensure a clear picture. Dirt and debris can damage an exposed lens when rubbed against it during wiping.
Do not wipe an exposed lens with your hands or a cloth. Chemical-based or abrasive cleaners should not be used because they can deteriorate the lens’ surface.
“Thanks so much for reading! We hope you enjoyed. Our goal is to provide you with the best content to help you keep your Tesla looking new. If you ever need a hand or would like you Tesla washed, feel free to check us out, we’re the #1 Tesla Car Wash.“
Stay Clean!
~The WashMyT Team